Address: Gongyi City,Henan Province,China
Tel: 15286802751
You are here: Home > News >

8011 container aluminum foil wholesale price per ton

Edit:Mingtai Date: 2019-08-09 11:33
Aluminum foil containers are a widely used tableware. In China, it is often referred to as a tin box. In fact, it is made of 3 or 8 series aluminum ingots as raw materials, cold rolled or hot rolled into uniform thickness, smooth surface, no pinholes, no dust particles, no odor aluminum foil mother roll, after special equipment and mold One-time automatic cold stamping production process.
The 8011 container aluminum foil has excellent barrier properties and can substantially completely block gas and moisture with sufficient thickness of the aluminum foil. Therefore, in plastic flexible packaging materials, 8011 container aluminum foil is used as a commonly used barrier material, and aluminum foil has a series of advantages such as light weight, airtightness and good coverage. Mainly hygienic, beautiful, and can also be insulated to a certain extent.
8011 container aluminum foil products are light in weight and the products meet the national food hygiene standards. It is easy to recycle, does not produce harmful substances during the treatment process, and no longer pollutes renewable resources.
The container aluminum foil is usually made of 8011 aluminum alloy or 3003 aluminum alloy. The thickness of household aluminum foil and 8011 container aluminum foil produced by Mingtai Aluminum is generally between 0.014 mm and 0.20 mm, and the width is generally between 100 and 1600 mm. The alloy generally has two types of 8011 container aluminum foil and 3003 container aluminum foil. Has the following advantages
1.8011 container aluminum foil surface is clean, flat, good shape, no corrosion, no defects, etc. Allow for the presence of minor marks, waves, wrinkles and marks that do not affect the use.
2.8011 container aluminum foil, the surface should be free of oil spots to meet customer requirements.
3.8011 container aluminum foil surface is not allowed to have pinholes.
4.8011 container aluminum foil ends should be tight, rolling, no cracks, severe burrs, no slip, sagging and dirt, but allow slight burrs. The staggered layer is not more than 1.0MM, and the tower is not more than 3.0MM.
5. Use high temperature tape to break the aluminum foil and make a clear identification; the length of the connection with the outer diameter of the mold should be greater than 500M; the number of aluminum foil coils with the joint should not exceed 20% of the total aluminum foil roll.
Contact Us
Tel: 15286802751
Address: Gongyi City,Henan Province,China
Canada manufacturers and suppliers supply marine grade,automotive,checker aluminum sheet with factory price-Henan mingtai aluminum